Archives
The 5T wall bracket and the 2.5T wall bracket are wall brackets that make it possible to withstand heavy duty loads, when it is not possible to install a falsework tower. See more
Designed for Touréchaf, MWP allows for the creation of working surfaces at the periphery of the façades for the personnel or for supporting the vertical formwork as a replacement for cantilever working platform.
It is proposed with a plywood or steel teardrop plate cladding. The 2 versions are compatible. The type of cladding is interchangeable..
See the technical documentation:
Télécharger les blocs AutoCAD®
Facilitates formwork
[fvplayer id="7"]
The Mills Pano system is a complete horizontal formwork system, particularly intended for carrying out slabs cast in place in the field of public works and structures.
It is also used to create service decking at the building edge, for example.
Mills Pano supplements the Touréchaf falsework system.
It contains accessories that meet the needs for finishing, handling, storage and implementation, in compliance with safety.
For optimum use, each Mills Pano formwork must undergo calculation specifically for it.
- lengths: 6m and 4m.
- widths: 1.25m and 2.5m. "Gusset" panels for access viaducts.
See the technical documentation:
Download Autocad® blocksExamples:
MP3 beams, for safe installation of plywood:
The MP3 formwork system is a set of 3 beams connected together by a handle that secures the installation of the plywood during the formwork of the concrete slabs.
The small spacing between the beams (10 cm) prevents a foot from passing through and protects from the risks of falling. Also, the overlaping zones of the MP3 make moving about easier.
MP1 unit beams are used for the keys. The complex shapes are carried out using standard lumber that have the same height as the MP3 and MP1.
The MP3 beams are delivered in specific cradles that do not require metal straps and their light weight of 14.8 kg makes installation easy.
The Phal P1 aluminium beam is mainly used as a primary beam (installed in the fork heads). The perfect symmetry of Mills Phal profiles makes them easy to use. Can be installed with hammerhead bolts and clips. It can be equipped with a wooden batten.
Advantages of the Mills Phal: The perfect symmetry of Mills Phal profiles makes them easy to use. The double wall provides perfect stability, great inertia under torsion and excellent horizontal inertia. Installed with hammerhead bolts and clamps. M20 wooden beams:It is used for all types of slab and wall formwork in civil engineering and construction.
Advantages of the M20: It's economical and easy to use. It's suitable for almost all civil engineering and building shoring applications.See the technical documentation:
See our realisations:
The protection system is comprised of universal post supports, posts equipped with sliders and barriers.
The universal post support adapts to all primary and secondary beams. Indeed, according to the direction of the beams, it is attached either on the primaries, or on the secondaries. The position in height of the post is then different. The sliders make it possible to vertically adjust the wire netting barrier on the plywood independent of the position of the post. The post support is comprised of captive parts and opens in order to facilitate assembly at the middle of the beam. It accepts posts with a 35x35mm section. The system meets the standards of EN 13374 class A. Advantages :Wire netting barrier:
Height: 1m30. Weight less than 15 kg. Flat for storage and the corners. Dedicated cradle.Universal post support:
Adapts to all types of beams. Captive elements. Opening possible. Tighten with a hammer. See the technical documentation:
