Escalib Mills en Kit

eSCAlIb MIllS KIT 8 e S C A l I b M I l l S Md S K I T : S I T e S P I R A l S TA I R ToWe R WI TH S I d e e X I T ( bolT e d Modu l e ) lifting and moving (no more than 8 modules stacked) ... > 1 - Reposition the guardrails to close any side exits. Check that the M24 screws are tight in place.Attach the crane hooks to the 2 lifting rings. detach the anchors. > 2 - Move the escalib. Pivot the escalib according to the height of the level which needs to be accessed with 90° rotations; Install 8 cm away from the wall. NB: Check that the ground on which the escalib Mills is to be erected is able to withstand the load. REQUIREMENTS: > Fit new anchorages as new modules are added. >The dismantle must be done in the reverse order of assembly. NB: Comply with the general rules for handling and stability. > 3 - Positionning on the ground and leveling the escalib. > 4 - Anchor the escalib Mills before removing the slings from the crane. > 5 - At the access levels, the guardrails are positioned so as to privilege access by the main face A (face names shown on the sticker). > 6 - Check that the stair tower has been anchored before unhooking the slings. Guardrails must be swung out of the way to allow access to the required level. 30° max. A gain of productivity and safety : the escalib can be easily and safely moved from on place to another and is used to create access to various slab levels with minimal effort .